Description
Crimar Composites supplies the complete range of corrosion-proof accessories and hardware needed to install and finish FRP grating, structural profiles, handrail, ladders, and walkways. Every item is available in FRP / vinyl-ester or 316 stainless steel to match the service life of your FRP structures — and we fabricate custom hardware to your drawings.
Why Crimar Hardware
- Corrosion-resistant FRP and 316 stainless options that match your FRP service life.
- One source for grating, structural, handrail, ladder, and piping hardware.
- No-drill and field-installable options that speed installation.
- Sized to fit Crimar grating and pultruded profiles.
- Custom hardware fabricated to your specifications.
What We Supply
Grating Clips & Hold-Downs
- Type M hold-down clips (saddle clips) — secure a panel across two adjacent bars to the support.
- Type G clips — clamp to a structural flange (≤ 3/4 in) with no drilling required.
- Type J hold-down clamps — light-duty, one load bar to the support.
- Type L hold-down clips — light-duty panel-to-frame fastening.
- Type C end-panel clips — join butted panel side bars to reduce differential deflection.
- Type T clips — flush / recessed grating installation.
- Heavy-duty Pawl, CSM, and W clips — extra holding surface for high-traffic or vibration.
- Complete hold-down kits — clip, bolt, washer, and nut.
Fasteners (FRP and 316 Stainless)
- Hex-head bolts and cap screws
- Hex nuts, nylon-insert lock nuts, and flange nuts
- Flat, lock, and fender washers
- Threaded rod / all-thread and double-end studs
- Carriage bolts and eye bolts
- Self-drilling and self-tapping screws
Structural Connection Hardware
- Equal and unequal angle brackets
- Connection and gusset plates
- Splice plates for beams and columns
- Beam and girder clamps
- Column base plates and footing plates
- Adjustable leveling feet and bases
- Square, round, and rectangular tube end caps
- Corner and joint connectors
Handrail & Railing Components
- Posts and stanchions
- Top rail and mid rail
- Slip-on fittings: elbows, tees, three-way and four-way connectors
- Wall-return brackets
- Floor flanges and base mounting plates
- Toe boards (kick plates) and toe-board clips
- Self-closing gate hinges and latches
Ladder & Safety Components
- Ladder side rails and rungs
- Rung-to-rail connection brackets
- Safety cage hoops and vertical straps
- Rest and landing platforms
- Ladder mounting brackets and wall standoffs
Stair & Walkway Accessories
- Anti-slip stair-tread nosing
- Stair-tread support brackets
- Stringer connection clips
- Bolt-on anti-slip grit plates and covers
- Edge trim and closure strips
Anchoring Hardware
- 316 SS wedge anchors
- Sleeve and drop-in anchors
- Chemical / epoxy anchors
- J-bolts and cast-in anchor bolts
- Concrete screws
Pipe & Cable-Tray Support Hardware
- Pipe clamps and U-bolts
- Pipe hangers and saddles
- Cable-tray splice plates and hold-downs
- FRP strut channel with strut nuts and fittings
- Cantilever support arms
- Anti-slip grit / non-skid surfacing
- Touch-up resin and field repair kits
- End-sealing resin for cut grating and profiles
- Edge guards and closure caps
- Color-matched putty
Materials & Options
| Materials | FRP / vinyl-ester, polyester, and 316 / 304 stainless steel |
| Sizes | Standard imperial and metric (e.g., 1/4 in – 3/4 in, M6 – M20) |
| Finishes | Standard, gritted (anti-slip), color-matched |
| Clip spacing | ≤ 48 in (1.2 m) on center; minimum 4 clips per grating panel |
| Corrosion | Matched to the FRP service life of your installation |
| Custom | Fabricated to your drawings and project requirements |
Item availability and specifications are representative; please confirm exact models, sizes, and materials for your project.
Used in industries: Electrical & Utility · Water & Wastewater · Chemical / Oil & Gas
